Wanted To Buy 03 MM timing cover

S

seanpatrick2000

New member
Help, my AC guy over tightened one of the pulley bolts and cracked my timing cover. when I removed the pulley then put it back on the post the pulley rides on pulled off. No I didn't over tighten it, it came off very easy it must have been cracked before i removed it. I think the guy put to long of a bolt in it and it would not tighten so he put the impact gun on it, unfortunately it's been a year or so since he worked on it I think he will tell me to jump in a lake if I complained. where can I get one, I checked eBay with no luck, there are Dorman products for the SOHC but not for the DOHC. I don't think it can be welded but if that is my last hope I can try that. does anyone know if that part is aluminum or just pot metal? if pot metal I don't think it can be welded.
 
what is Costly???
it's not that heavy maybe a kg or so.... but the size is probably the driving factor
I'm in sunny So Cal, Anaheim near Disneyland 92805 can you check the shipping cost?
can you send a snap shot of it?

Notice I used metric just for my friend from north of the border.....
I'll pm you my email address so if you can send a pic send it direct.

Sean
 
Last edited:
It can be welded and hold up just fine. But doing so will cost almost as much as replacing it and probably take longer.


Sent from my iPhone using Tapatalk Pro
 
I guess I should have called the ford dealer first, I thought the car was to old but they have them in the warehouse so I ordered one.
if anyone needs one check the dealer they said they have 9 in stock.
 
seanpatrick2000 said:
I guess I should have called the ford dealer first, I thought the car was to old but they have them in the warehouse so I ordered one.
if anyone needs one check the dealer they said they have 9 in stock.
Click to expand...

3R3Z-6019-AA is a discontinued part. How much did you pay and what is dealers name and location?
 
he may have gotten me the wrong part, he sold me a 2w7z6019AB he showed me a picture and it was the timing cover. Villa Ford in Orange CA he said it is in the warehouse and will be in Monday. I am looking at the receipt and it says SPO COVER - Cylinder, he may have screwed up???
I guess I'll see Monday
 
I googled the part number I have and it showed the timing cover at amazon.com
https://www.amazon.com/Ford-2W7Z-6019-AB-Engine-Timing-Cover/dp/B000NS0GT4
I paid $151.25 maybe the part number you have is deprecated and this is the new part number???
I don't know what to think, I guess I'll wait till Monday to find out

he looked it up by the vin number of the car since he is a ford dealer not a mercury dealer??? strange I just googled it again
and TASCA parts has it also
https://www.tascaparts.com/oem-parts/ford-cover-cylinder-front-2w7z6019ab?c=az0x

the picture looks right they are saying it's for SOHC so I am curious now the picture looks like the one on my MM DOHC

oh I see the top is wider on the DOHC version, that idiot he looked it up from the vin number
 
Last edited:
seanpatrick2000 said:
I googled the part number I have and it showed the timing cover at amazon.com
https://www.amazon.com/Ford-2W7Z-6019-AB-Engine-Timing-Cover/dp/B000NS0GT4
I paid $151.25 maybe the part number you have is deprecated and this is the new part number???
I don't know what to think, I guess I'll wait till Monday to find out

he looked it up by the vin number of the car since he is a ford dealer not a mercury dealer??? strange I just googled it again
and TASCA parts has it also
https://www.tascaparts.com/oem-parts/ford-cover-cylinder-front-2w7z6019ab?c=az0x

the picture looks right they are saying it's for SOHC so I am curious now the picture looks like the one on my MM DOHC

oh I see the top is wider on the DOHC version, that idiot he looked it up from the vin number
Click to expand...

Very typical that the parts department only show for a 2V, especially on ‘03’s.


Sent from my iPhone using Tapatalk Pro
 
you would think that their data base would be better then that. but then again programmers are not that car smart, though I'm a programmer but I used to be an NIASE mechanic in a past career. shows my age, it's not NIASE anymore it's just ASE
 
You must log in or register to reply here.
Back
Top