Haki 03 Project

[Dennis Reinhart]

Today we undercoated the entire under carriage of the car, we received the spider gear kit to convert Hakis new 28 spline Carrier to 31 spline, we have the new axles, we installed new emergency brake shoes painted the backing plates, and have the rear rotors and brake lines ready to install tomorrow, the transmission is out being rebuilt, the motor is out will detail the hood, and the install the Cobra crate motor. I am sending out the VC and timing cover and intake to be painted black, Haki is coming in Friday, I also wanted to say Larry is doing great and I am going to install a Cobra crate motor in his car as well, so we have a full shop, we did have a issue with the powder coater and some pipes were delayed but every thing is in order now and I sold a Novi 2200 Friday for another member, I will post detailed pictures of Hakis 31 spline rear end tomorrow, and I also wanted to congratulate Steve Schingler AKA Glassman on his great time, he cut a 1.4 60' time, it's about time he got a break.:beer::beer:

 

[Pat]

I will post detailed pictures of Hakis 31 spline rear end tomorrow :beer:

I know that's what you meant, just having a chuckle.


BTW what specifically was the cause of Glassman's fuel pump issue at SSHS10, do you know?

 

[Dennis Reinhart]

I know that's what you meant, just having a chuckle.


BTW what specifically was the cause of Glassman's fuel pump issue at SSHS10, do you know?

I talked to Steve it was the very low temperature this was a record low for over ten years that morning,

So here are the photos and I am really impressed the way this has turned out I will have the rear end finished tomorrow the under carriage looks like a new car. I am going to add another coat of undercoating, and will post the finished pictures tomorrow.

New emergency brake shoes new shocks new cont arms the whole under carriage under coated

 

[Dennis Reinhart]

Well the rearend is complete along with new shocks new brake lines new rotors powdercoated rotors and the new engine will go in next week.

 

[hakisaki]

wooooooohoooooooooooooooooo!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

[babbage]

It looks fantastic, very nice. Gabriel ultra shocks - are they firmer than factory?

 

[burt ragio]

Looking spanky new real sweet. Between the visuals drilled/slotted rotors rear cover big sway bars & trail arms you get bling & performance. Is there also a rear pro guard you added ? What mfg are the rotors & pads are you using ?

 

[Dennis Reinhart]

Looking spanky new real sweet. Between the visuals drilled/slotted rotors rear cover big sway bars & trail arms you get bling & performance. Is there also a rear pro guard you added ? What mfg are the rotors & pads are you using ?

Yes Burt it has a new Pro Guard, and the Rotors and powdercoated calipers come loaded I get them from a company that also does the Stainless lines. The front will be done the same way.

 

[Dennis Reinhart]

Well this week we are installing the engine, and transmission. I am waiting on the valve covers and timing cover and intake to come back from the powder coater, here is the dynotech drive shaft.

Inner cooler installed.

 

[hakisaki]

looking goooooooood!!!!!!!

 

[hakisaki]

it's 25 degrees in nashville right now....

 

[napolitano]

Everything looks to be coming together for you Haki. Not so for me, one problem after another. Can't wait to see what your car will do at the track.

 

[Dennis Reinhart]

Its coming along, as I told him I like to take my time the Crate motor is here, I sent his intake out and VC as well as the timing cover as I have another project car that is here, and they have come back and look good.

So will get these on and and set the motor in there.

 

[hakisaki]

what happened levi???????

 

[CBT]

Is that lower powder coated? If so, looks pretty sweet, I like it.

Its coming along,

So will get these on and and set the motor in there.

 

[Dennis Reinhart]

It is and The VC and timing cover will look the same this is the only thing holding us up from getting the motor in.

 

[Dennis Reinhart]

Well the upper intake showed up today along with the timing cover, we pulled the engine, we need tha VC and its ready to go together.

 

[napolitano]

Haki, I was throwing a few codes on mm's computer, so i datalogged it and sent the file to dennis for review. Dennis corrected it with a file. That is what is cool with xcal3, you can datalog your car and send the file to dennis to look at from time to time just to make sure everything is good with your car. Now i have to wait for these Aeroforce guages to come in, they are on backorder, so i can install them on my MM. I'll call you tommorow night. Need some info on a simple system for the car.

 

[hakisaki]

no problem and send me your email address so i can paypal that you money.... i have a perfect mid/high and amp and sub setup for our marauder's 2-3 8 inch subs in the upper deck of the truck that take's up absolutely no space and weigh's nothing... i will post pic's when i get my car back and show you!!!!!!

 

[hakisaki]

thanks's for all the pic's dennis it's keep me way less worried about everything....it's like christmas i can't wait to drive it again.........man im getting anxious