Advice needed and requested

[1Marauder]

Need NEW sway bar end links. Have the tube Addco front sway bar. Which ones are best? Recommendations?

 

[RubberCtyRauder]

IIRC, Moog was used regularly. I bet GdMJoe has a part number

 

[Ambitious1]

+1 on the Moog end links. Moog Part # K80140.

These links may help:

https://www.summitracing.com/parts/mog-k80140/overview

https://www.mercurymarauder.net/forums/showthread.php?67017-moog-end-links

 

[musclemerc]

It all depends. What year is your car? If it's a 04 you need to get a set of locks from Addco to keep the bar centered so the end links don't contact.

Moog end links are larger than the OEM end links. The last 04 I did I went with OEM end links not Moogs. No contact issues with the locks in place.

My 03 does not need the locks and I run Moogs no problem. But some 03's had this issue too.

 

[Comin' in Hot]

It also depends if your lowered or have a big brake kit, i know the Baer/Jerry kits will break the grease fittings off the thickers moog endlinks. I would stick with the OEM style.

 

[1Marauder]

Thanks so much all. Ordered Moogs for this one... As no big brake kit. Will OEM other two when needed... And am fairly sure I have the sway bar locks to keep it from walking.