HELP!!!

[dukestt]

Cant take my rear tire off to fix a flat any suggestions


Sent from my iPhone using Tapatalk

 

[dukestt]

this is how far I got


Sent from my iPhone using Tapatalk

 

[martyo]

Kick it at the bottom or use a rubber mallet and give it a good whack.

 

[Zack]

You have to unscrew the Allen bolts off the caliper covers bro

 

[martyo]

You have to unscrew the Allen bolts off the caliper covers bro

These calipers were from Dennis Reinhart so they only screw one way!

 

[dukestt]

marty ill try it


Sent from my iPhone using Tapatalk

 

[jimbok1951]

Stuck Rim

Kick it at the bottom or use a rubber mallet and give it a good whack.

Check this out. This guy Erick has some good videos and is entertaining.

https://www.youtube.com/watch?v=H7PWwrcGREM

 

[dukestt]

thanks fellas the swift kick worked!!!


Sent from my iPhone using Tapatalk

 

[RubberCtyRauder]

put a small amount of anti-seize on the hub bore and face where the rim mounts. Aluminum and steel don't mix and cause corrosion between them

 

[J-MAN]

put a small amount of anti-seize on the hub bore and face where the rim mounts. Aluminum and steel don't mix and cause corrosion between them

+1........

 

[Fastbob]

put a small amount of anti-seize on the hub bore and face where the rim mounts. Aluminum and steel don't mix and cause corrosion between them

I wire brush the mounting surfaces then apply the anti seize.

 

[fastblackmerc]

All good info about wire brush and anti seize. Don't ever use anti seize on the lug nuts.

To get he wheel "unstuck" I back off the lug nuts about 1/2 turn then do a small burn out. Loosens them up every time.

 

[MyBlackBeasts]

All good info about wire brush and anti seize. Don't ever use anti seize on the lug nuts.

To get he wheel "unstuck" I back off the lug nuts about 1/2 turn then do a small burn out. Loosens them up every time.

We'd back lugnuts off till1/4" gap to wheel do 5th gear doughnuts to get the steer tires off semi tractors when this happens. :burnout: