inventory of spare parts

I

ImpalaSlayer

...
i know this was done a few years ago but i was asked in another thread how many spare parts i have, so i took an inventory, here goes.

03 cobra short block
03 mm heads
04 mach heads
04 valve covers
mm balancer
mini spare
31 spline axles
brand new cross over tube
Terrys modded tensioner bracket
stock injectors
musclemerc catch can
spare alt
blown alt
eaton swap battery tray
brand new battery tray
stock maf
stock mufflers
3.55s
300a dash trim, both sides but big piece is dented
stock front calipers
upper intake
lower intake
brand new COPs
1 mm wheel
center caps
60lb injectors
3 gauge a pillar pod
jvc head unit
cluster surround with vents and light switch
BNIB floor matts
grille
front bumper
stock manifolds
stock speakers
b and c pillar trims
spoiler
coil covers
steering wheel
hood insulator
coolant res
timing cover
water pump
power steering res
stock tc
drag radials



im sure im missing some stuff, what do you guys have laying around?
 
Like new cross over tube
Trilogy tensioner bracket
stock injectors
42 Design catch can
brand new COPs
7 MM wheels w/tires
center caps
3 gauge a pillar pod (spare)
Stock head unit
cluster surround with vents and light switch
BNIB floor mats X 5
MM grille
MM header panel
MM front bumper
MM foglights X 2 sets
MM head lights
MM side marker lights
MM heated mirrors
MM door handles
MM door panels X 4
radiator cover
differential cover
MM driveshaft
stock manifolds
stock speakers
spoiler
decklid
rear body applique MM specific X 2
MM tail lights
MM rear bumper
hood insulator
window switches
MM shifter trim

I am certain that there are a lot of smaller parts that I have missed, I have a few bins with misc. parts in them.
 
I'm a MM nut too now... Especially since as I type this, I'm looking at 32 valves on my coffe table! :beer:

Black Hood
stock tb
stock air box, etc.
stock balancer
2 axles, 28 spline
31 spline Trac-loc carrier
3.55 gears w/trac loc
3.73 gears
2 polished rims, 2 spare rims
4 snow vic rims w/rubber
stock lower intake
spare Zex kit
WAP block (needs sleeves)
Timing cover
6 bolt crank
Engine harness
stock exhaust
Entire MM engine, just needs a rebuild

To be installed:
new engine
3 gauge pillar pod
LC-1 w/Lunar A/F gauge
Lunar NOS gauge
Vacuum/boost gauge
n2o bottle warmer
n20 remote opener
DR exhaust (not here yet)
 
Last edited:
Spectragod said:
Like new cross over tube
Trilogy tensioner bracket
stock injectors
42 Design catch can
brand new COPs
7 MM wheels w/tires
center caps
3 gauge a pillar pod (spare)
Stock head unit
cluster surround with vents and light switch
BNIB floor mats X 5
MM grille
MM header panel
MM front bumper
MM foglights X 2 sets
MM head lights
MM side marker lights
MM heated mirrors
MM door handles
MM door panels X 4
radiator cover
differential cover
MM driveshaft
stock manifolds
stock speakers
spoiler
decklid
rear body applique MM specific X 2
MM tail lights
MM rear bumper
hood insulator
window switches
MM shifter trim

I am certain that there are a lot of smaller parts that I have missed, I have a few bins with misc. parts in them.
Click to expand...


wow like 95% of that is mm specific stuff.
 
Being a "Rookie" and only having my MM since October here is my list:

1. Stock Air Cleaner Assembly (K&N from Landy on car).
2. 4.10 gears and Ratech bearing kit in garage.
3. 30,000 GVW Trans Cooler made in USA in garage. (for trailer being towed soon).
5. Magnaflow 2.25" stainless mufflers pair (to be installed later this year).
6. One refurbished stock rim and center cap (to be used as my spare).
7. 2- 255 50 18 BFG stock rear tires when the new ones wear down I am ready!
8. Marauder silver inset for the rear bumper (for my black car will be put on soon).
9. APP 104 plugs to be installed very soon.
10. Autometer single gauge pod for transmission temperature gauge already bought.
11. Stock tranmission pan with drain plug and Ford circle painted blue! To be installed soon!

I am sure there is more but this is what is on the to do list. With many cars (7 of my own) I have TOO MUCH STUFF! LOL
 
bosscj72 said:
Being a "Rookie" and only having my MM since October here is my list:

1. Stock Air Cleaner Assembly (K&N from Landy on car).
2. 4.10 gears and Ratech bearing kit in garage.
3. 30,000 GVW Trans Cooler made in USA in garage. (for trailer being towed soon).
5. Magnaflow 2.25" stainless mufflers pair (to be installed later this year).
6. One refurbished stock rim and center cap (to be used as my spare).
7. 2- 255 50 18 BFG stock rear tires when the new ones wear down I am ready!
8. Marauder silver inset for the rear bumper (for my black car will be put on soon).
9. APP 104 plugs to be installed very soon.
10. Autometer single gauge pod for transmission temperature gauge already bought.
11. Stock tranmission pan with drain plug and Ford circle painted blue! To be installed soon!

I am sure there is more but this is what is on the to do list. With many cars (7 of my own) I have TOO MUCH STUFF! LOL
Click to expand...
Stock rear tires are 245/55-18, most people upgraded to 255/55-18. Don't know if your 255/50 was a type or not.
 
4 CVPI steel wheels (2 used, 2 new)
2 255/50-16 bfg drag radials on cvpi steel wheels
2 235/70-16 winterforce snow tires on cvpi steel wheels
2 255/70-16 winterforce snow tires on cvpi steel wheels
4 CVPI steel wheel covers
Marauder stock hood
Marauder stock airbox and zip tube
Marauder stock sub
39lb injectors
SVT-F fuel pump
Marauder OEM front rotors (new)
Marauder OEM front brake pads (new)
Custom made mid-pipe side exiting exhaust pipes with tips
Marauder transmission pan
Marauder original 28-spline Trac-Lok unit (142k miles, needs to spider gears and clutch pak)
Cobra 8.8 clutch pak
8.8 28-spline Trac-Lok unit out of an Explorer that's in great shape
Rear gear basic install kit from Ford

I'm sure I have other little odd and end pieces.
 
You must log in or register to reply here.
Back
Top