Wanted To Buy ISO Zack's cooling mod fittings.

musclemerc said:
Both of those will not work FBM. As you should know the MM needs 2 fittings

To those asking for a "kit" if your unable to figure out what fittings to buy dont even bother with a cooling mod.

It's way over your head.
Click to expand...


And why don't we have a "LIKE" button, it's in order here for sure....:beer:
 
For the record you can remove the rear expansion plugs without dropping the trans.

Remove the wiper cowl, tons of room back there.

I’m not in a fight with anyone. Hell I invented the 5/8” cooling mod

Check the archives on my old forum on this site
 
Spectragod said:
No, you are thinking the trans needs removed, and it doesn't, all I did was clarify that, would it make it for easier access, yes, but at the cost of an R&I of the trans I wouldn't do it. It will bolt in just fine without taking the car apart.
Click to expand...

Still a reading comprehension issue but I’m done responding to you here, I’d make more progress talking to a rock.
 
Spectragod said:
And why don't we have a "LIKE" button, it's in order here for sure....:beer:
Click to expand...

musclemerc said:
For the record you can remove the rear expansion plugs without dropping the trans.

Remove the wiper cowl, tons of room back there.

I’m not in a fight with anyone. Hell I invented the 5/8” cooling mod

Check the archives on my old forum on this site
Click to expand...

My point was that if he’s hiring some random shop to do it (I have no idea who would be doing the work), they likely could charge him a ton of labor and MAY pull the trans. That is the only point I made and then said go with fittings for the top of the heads instead of the back as it’s easier to access.

Somehow that turns into I have no idea what I’m talking about and am spreading misinformation.
 
crownvic97 said:
The lethal performance kit goes to the back of the heads correct? You will be looking at a good bit of labor charges at a shop for pulling the trans to do that I’d imagine.
Click to expand...

I comprehend, as you say, you would imagine labor would be high to pull the trans in order to install that kit, how that is accurate information, I am unsure.
 
if one is not installing themself, you need to go to a performance shop. a dealer or average Joe's garage is going to look at you like "you want what "? any performance shop that has dealt with mustangs knows this mod.
 
Why do You people keep posting info on this thread? Mods, help Me out here.....

All I need is a cooling mod set. No nonsense Sheesh.


Sent from my iPhone using Tapatalk Pro
 
RubberCtyRauder said:
apparently, nobody has a cooling mod set or they would have posted it, so options were posted to make or buy elsewhere.
Click to expand...



Actually, You're wrong. This wasn't a post for anything else to suffice. 2 people contacted Me with the correct parts. I'm good now!


Sent from my iPhone using Tapatalk Pro
 
Decided to jump in on this thread rather than make another redundant one. I'm in need of cooling mod fittings for an NA car and would like them shipped out ASAP. I'm tearing the car down for timing chain guides/tensioners this weekend and figured I might as well do the cooling mod while I'm in there.

Is there anyone that could ship parts out before this weekend? I know they wouldn't get here until next week, but I'm on a time crunch to get it all done.
 
HotRaud90 said:
Decided to jump in on this thread rather than make another redundant one. I'm in need of cooling mod fittings for an NA car and would like them shipped out ASAP. I'm tearing the car down for timing chain guides/tensioners this weekend and figured I might as well do the cooling mod while I'm in there.

Is there anyone that could ship parts out before this weekend? I know they wouldn't get here until next week, but I'm on a time crunch to get it all done.
Click to expand...



Sorry but I'm first in line here. This thread has been hijacked and corrupted.


Sent from my iPhone using Tapatalk Pro
 
03Merc said:
Sorry but I'm first in line here. This thread has been hijacked and corrupted.


Sent from my iPhone using Tapatalk Pro
Click to expand...
Of course you're first. No one doubts that or sees otherwise. I'm simply adding my request to a thread where most of the guys who fab these parts are commenting and frequenting. No harm intended.

Sent from my SM-G950U1 using Tapatalk
 
You must log in or register to reply here.
Back
Top