For Sale Marauder wheels, nice, widened 2" by Weldcraft

chief455

chief455

New member
2 rear wheels. Stock, clean surface, not perfect but nice and can be polished up nicer. Not bent or rashed.
Widened 2" by Weldcraft and driven by member CWright / Cdub. These fit his stock body and suspension. A 1/2" spacer may be required. 10" width is perfect for 11 - 12" section width tires, and no poking out.

I have these in my freezing cold garage in the boxes shipped to me, under a stack.
If interested to buy, will dig and picture.
Figure a stock wheel is ~$150, and widening costs ~$150/wheel with a wait time - I sell these for $700 pair plus actual shipping.
SOLD. 12/14/19 (Mailed cashiers check / full price)

If a good set of pictures will prompt you to buy, pm me.

car with same rim, 1/2" spacer and 305/40 MT drag
 
Last edited:
One wheel has a spoke with 2 tiny ding marks. Other wheel has one spoke with minute surface scuff. Cosmetic, price not reduced.








 
So, as advertised, not perfect, clean surfaces. Will polish - no rash, not bent.
Pictures taken to interested person to prompt a sale.
I hope my time was not just wasted in the 20 degree weather on a busy day....these are nice widened wheels at huge savings.
 
Are you sure 2inch? Most went 1.5 so not to rub shock. rims measure inside bead to inside bead. Overall outerlip will be half inch per side wider. I might be interested.
 
Last edited:
Your almost giving these away, I wouldn’t take less than $800 for a set, you’ll have $500 just for weldcraft by the time you ship both ways with insurance, not telling you what to do, but........ you need to raise your price bud.


Sent from my iPhone using Tapatalk
 
RubberCtyRauder said:
Are you sure 2inch? Most went 1.5 so not to rub shock. rims measure inside bead to inside bear. Overall outerlip will be half inch per side wider. I might be interested.
Click to expand...

If I recall correctly, Chris had these widened 2”, I’d have to go find his build list


Sent from my iPhone using Tapatalk
 
RubberCtyRauder said:
Are you sure 2inch? Most went 1.5 so not to rub shock. rims measure inside bead to inside bear. Overall outerlip will be half inch per side wider. I might be interested.
Click to expand...

See the pictures - it reads
''add 2"' right inside the rim. Yes, most did 1.5" but these are 2" and fit without issue. Shock tube cutting, maybe a 1/2" spacer - not a big deal for such a huge improvement to the car.
Mark, if you want them, pm me.
Spectragod said:
Your almost giving these away, I wouldn’t take less than $800 for a set, you’ll have $500 just for weldcraft by the time you ship both ways with insurance, not telling you what to do, but........ you need to raise your price bud.


Sent from my iPhone using Tapatalk
Click to expand...
you're right. The first 'interested pm asking for pictures didn't buy them. I thought I posted clear to message me IF YOU WANT TO BUY THEM.
It won't change the price or item by asking questions on fitment or specs that are posted in the ad.
I might as well get fair market value or keep them. I'm tired of being stroked and offered pennies for parts. Thanks.
 
Last edited:
Worth every penny...….weld Craft charged me 225 a rim.
If I already didn't have set I'd be all over these...…..
 
Blakshukvw said:
They’re only worth what buyers will pay. That’s the case with all custom cars and parts.
Click to expand...
Absolutely true. They will only sell for what the seller accepts as well.
hotford said:
Worth every penny...….weld Craft charged me 225 a rim.
If I already didn't have set I'd be all over these...…..
Click to expand...
hmm, couldn't remember the charge. AND the month or longer wait time - plus shipping to and from Weldcraft.
If someone wants widened rear wheels, AND has the money - this pair saves both time and money.
 
Last edited:
Blakshukvw said:
They’re only worth what buyers will pay. That’s the case with all custom cars and parts.
Click to expand...

Translation-I don’t have that much money, so I’ll try to beat you down in your F.S. Post, for this reason, most of my parts hit the trash, tired of little weasel f¥{ls trying to get high end parts for free, and using the internet as their soap box.


Sent from my iPhone using Tapatalk
 
On 1.5' Widened Wheels P305/45R18 DR rubbed.

I was not 100% comfortable on the number of turns needed on a stud for a car that is raced. One
Web site said 6 turns.

OEM ~12.5 Turns, W/ .25" Spacer ~7.5 turns.
I purchased Currie Studs and had them machined. I got ~14.5 turns and so far = good.
Brand:Currie Enterprises
Manufacturer's Part Number:CE9000D Part Type:Wheel Studs
Product Line:Currie Wheel Studs
Summit Racing Part Number:CUR-CE9000D

Wheel Stud Style: Press-in
Wheel Stud Thread Size: 1/2-20 in. RH Underhead Length (in): 3.000 in.
Knurl Diameter (in.): 0.610 in.*
*The OEM Knurl 0.609
 
Spectragod said:
Translation-I don’t have that much money, so I’ll try to beat you down in your F.S. Post, for this reason, most of my parts hit the trash, tired of little weasel f¥{ls trying to get high end parts for free, and using the internet as their soap box.


Sent from my iPhone using Tapatalk
Click to expand...

_^^ lol
how did you know that post was followed by a $500 shipped offer? Guess it's getting predictable
 
sailsmen said:
On 1.5' Widened Wheels P305/45R18 DR rubbed.

I was not 100% comfortable on the number of turns needed on a stud for a car that is raced. One
Web site said 6 turns.

OEM ~12.5 Turns, W/ .25" Spacer ~7.5 turns.
I purchased Currie Studs and had them machined. I got ~14.5 turns and so far = good.
Brand:Currie Enterprises
Manufacturer's Part Number:CE9000D Part Type:Wheel Studs
Product Line:Currie Wheel Studs
Summit Racing Part Number:CUR-CE9000D

Wheel Stud Style: Press-in
Wheel Stud Thread Size: 1/2-20 in. RH Underhead Length (in): 3.000 in.
Knurl Diameter (in.): 0.610 in.*
*The OEM Knurl 0.609
Click to expand...
YES!!

1/2" spacer SHOULD be accompanied with longer studs. thanks for bringing that up.
guys have to remember - the section width and exactly where at it's widest point, will be your interference. Some cars are riding higher/lower so the tire width is at a different point of the shock / outer wheelhouse
these are MODIFICATIONS - results vary.

BUT - these wheels will fit, enable wider tires, and look the balls, at a big savings and far faster than getting a set sent out!
 
Last edited:
As has been noted already....$700 is a DEAL for two widened OEM Marauder rims.
Buy them and then save your stock Marauder rims.

Jeez,
This site has quickly become like the FourEyed Pride forum....
Lots of 'tire kickers' and low ballers, but no one wants to pony up any cash.

Sent from my Pixel 2 XL using Tapatalk
 
Joe Walsh said:
As has been noted already....$700 is a DEAL for two widened OEM Marauder rims.
Buy them and then save your stock Marauder rims.

Jeez,
This site has quickly become like the FourEyed Pride forum....
Lots of 'tire kickers' and wanna be ballers, but no one wants to pony up any cash.

Sent from my Pixel 2 XL using Tapatalk
Click to expand...

FIXED it for you... lol [emoji23]



Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top