Zack and Mac Control Arms

Yes, I am interested in a set of Z&M control arms.

  • Total voters
    22
  • Poll closed .
Well I got the update and was dissapointed. Rather than explaining, we are shooting for early next week.
Thanks for the understanding, its not the builders fault.
 
Hey, I've waited this long. What's another weeK? Its raining anyway. Would kill me to have the parts and not be able to go out to put them on.
 
Update.
The control arms are built and just arrivved at the powdercoater.
im leaving for Floriday Thursday at 3pm, but hope to have all the sets shipped before departure.
We have 10 sets sold, but 16 sets were manufactured.
So if you would like to have the best control arms available, here is your chance.
Thanks
 
Ok, they are done but not in my hands yet!
The builder is on his way to the north side of Chicago to pick them up.
I will pick them up from him later tonight. The boxes are already built and the instructions printed.
Im leaving for Florida tomorrow, but will arrive late to work so I can ship them out. Everyone has been patient enough and trusting me with their money!!
Your name and tracking # will be in THIS thread tomorrow before noon.
From Mac and I, thank you.
 
Zack,

Have the extra CA's been claimed. If not I would like a pair. I can wait until you get back but I definitly want a pair. I was leaning Metco's way but after reading about these I am sold. $450 right? What is the shipping to 20032.

House
 
Big House said:
Zack,

Have the extra CA's been claimed. If not I would like a pair. I can wait until you get back but I definitly want a pair. I was leaning Metco's way but after reading about these I am sold. $450 right? What is the shipping to 20032.

House
Click to expand...

$450 shipped.
Paypal tonight to:
zackmcgrath@hotmail.com
they will go out tomorrow.
Thanks
 
Any option other than paypal? Got screwed the lasting time I used it. Account got hacked 1200 was attempted but the bank got them after the first 300. Really weary of using it now.
 
Zack said:
From Mac and I, thank you.
Click to expand...
Yup...Thank you all very much. I'm pleased (and proud) this project came in on time.

Do us a favor and post up with your impressions once you have the install completed? We appreciate the feedback, and it encourages us to develop more accessories for the Marauder down the road (and we do have more ideas on the planning table now).

Thanks again, high five Zack! Nice job!
 
SergntMac said:
Yup...Thank you all very much. I'm pleased (and proud) this project came in on time.

Do us a favor and post up with your impressions once you have the install completed? We appreciate the feedback, and it encourages us to develop more accessories for the Marauder down the road (and we do have more ideas on the planning table now).

Thanks again, high five Zack! Nice job!
Click to expand...

You're welcome guys as I will soon be the proud owner of a set!

Paypal tonite Zack.

Mike.
 
Thanks much for all the help! Can't hardly wait! Want to give us a hint as to the next "projects" you might be planning?
 
Zack said:
Ok, they are done but not in my hands yet!
The builder is on his way to the north side of Chicago to pick them up.
I will pick them up from him later tonight. The boxes are already built and the instructions printed.
Im leaving for Florida tomorrow, but will arrive late to work so I can ship them out. Everyone has been patient enough and trusting me with their money!!
Your name and tracking # will be in THIS thread tomorrow before noon.
From Mac and I, thank you.
Click to expand...

Actually... thanks to YOU and MAC !

Waiting a little pales in comparison to the work you guys went / are going through to get the product produced for us! :bows:
 
Master said:
Thanks much for all the help! Can't hardly wait! Want to give us a hint as to the next "projects" you might be planning?
Click to expand...

About your Control Arms. I have to travel many miles to a facility that does international ground. I will try and make it there before my flight to Florida tomorrow. I can only promise Ill do my best.
 
One more thing to everyone.
We normally run a hone through the bushing ends to clean up any powdercoating or tape left behind. Its simply for cosmetic reasons.
I was so rushed to get these out tomorrow, we had to skip this step.
Some arms might have some tape or powdercoating left behind. Do not worry.
The bushings will go in just as easily, or you can remove any residuals with a utility knife blade. You wont see anything once the bushings are installed.
 
Here Are the Tracking #'s from Fed Ex!
Here is the beginning of the tracking #.
469107350347
Your last 3 digits is after your name

Craig Zelden 225
Peter Korp 232
Jake Freije 249
Jim Lambert 270
Chris Heissler 294
Henry Satinskas 300
Rich Alves 317
Steven Banta 348
Kevin Campbell 362
Edna Richardson 379
Mike Heckman 409
David Forbrigger UPS# 1Z610X796851487449
Mac In my Garage
Zack Also in my Garage waiting to go on MM #2
 
Last edited:
Man-oh-man, that just not cool.

Everybody else gets free shipping but me. I gotta go to the garage to get mine.

Bummer...
 
TTT.
Check in here with your first impressions!
Also, there are 5 unsold sets, making this last run a total of 20 sets. That puts the Z&M Bars up to around 80 sets on the road.
 
The set of control arms arrived with no problems, looking good Zack. Now Chris is bothering me to put them on #5.
 
Last edited:
You must log in or register to reply here.
Back
Top