Haki 03 Project
- Thread starter Dennis Reinhart
- Start date
Dennis Reinhart
.....
Dennis Reinhart
.....
I am sorry for for delays on Hackie's updates, first of all I was sick for 2 weeks, I have never been in bed this long except with two twins I met in France while in Desert Storm.
But this week I got back on it I now have three Marauders here for 03 Cobra conversions with Novi 2200 S/C, Hackies car was very rough it needed undercoating new brakes steel lines, new trans the car has a 130 K on it, I have taken my time and gone through the whole car, new drive shaft full gauges new drivers window motor 60 lb injectors twin fuel pumps B5 5000 Maf LTH Pro guard it should make 17 PSI 410 gears, it starts and idles perfect he is flying in tomorrow to look at the complete transformation.
So here are a few shots the next car will be all Black even the supercharger, to day we did a 06 Roush with just a CAK it gained 25 RWHP with the tune he is over 400 to the tires.
Shown to the side is the 06 3V GT we are installing a Novi 22 air to air these will be posted next week
Here are the Videos on the Roush we just did the front facia was torn we ordered that pre painted and added a huge Avoco heat exchanger with twin fans, stock it made 369 with just a cold air kit it gained 25 RWHP after leaning the fules and adding some timing the made 415 RWHP, what a great car. I have sold five Marauder kits since Jan 14 and two CVPI kits, thank you the members for this.
http://www.youtube.com/watch?v=04_LmsL_ikc
musclemerc
Senior Member
Looks good Dennis. 
Dennis Reinhart
.....
Looks good Dennis.
Thank you that means a lot to me coming from you, I charged Hacki 900.00 for just the SC install, where other shops have charged upwards of 1500 or more, not including the dyno tune, I try to be as fair as I can and I so much enjoy this site and it's members. I do wjhat ever I can to make any one happy, but we all know this is not a reasonable goal, but I try. And to me that is what is most important.
LANDY
Regulate Racing
those arent drag radials, but they will do the job. highly recomend to get used to the car and its power especially on wet roads, before choosing tires.
Dennis Reinhart
.....
Base numbers are in
Hacki showed up today and I had the blower off trying to get the right belt, I started with 110.5" and had belt slippage it made 448 RWHP, so I ordered a Napa belt 109 3/8" it was tight but worked on the fourth pull it made Hacki smile I will stop here but I will make some changes to the A/F and straighten it out a bit, till I get some miles on the car, I am using a new twin fuel pump set up and the FRP was good the duty cycle was 2.4 I am finishing installing Muth Mirrors and a few other add ons, over all this has turned out to be a real good project we start another one next week.
These are in standard Hacki wanted to see these as well as SAE.
I will post the video later tonight and Hacki took a bunch of pictures.
http://www.youtube.com/watch?v=fI4Tt9wCisA
Hacki showed up today and I had the blower off trying to get the right belt, I started with 110.5" and had belt slippage it made 448 RWHP, so I ordered a Napa belt 109 3/8" it was tight but worked on the fourth pull it made Hacki smile I will stop here but I will make some changes to the A/F and straighten it out a bit, till I get some miles on the car, I am using a new twin fuel pump set up and the FRP was good the duty cycle was 2.4 I am finishing installing Muth Mirrors and a few other add ons, over all this has turned out to be a real good project we start another one next week.
These are in standard Hacki wanted to see these as well as SAE.
I will post the video later tonight and Hacki took a bunch of pictures.
http://www.youtube.com/watch?v=fI4Tt9wCisA
Last edited:
guspech750
V.I.P Parking for DTR's only!!
Nice. Very nice.